Replace the Glass of the Samsung Galaxy Watch6 Classic.

Replacing the glass on a Samsung Galaxy Watch6 Classic can be a delicate and challenging task, and it may void your warranty if you have one. If you’re not experienced with electronics repairs, I would strongly recommend seeking professional help from a certified Samsung repair center or a qualified technician. However, if you’re confident in your skills and want to attempt it yourself, here’s a general guide on how you might go about it:

Also Read: How to replace the back of Samsung Galaxy F34

Note: This guide is for informational purposes only, and I assume no responsibility for any damage or voided warranties that may occur as a result of attempting this repair.

Tools and materials you’ll need:

  1. Replacement glass for Samsung Galaxy Watch6 Classic.
  2. Screwdriver set.
  3. Plastic opening tools or a case opening tool.
  4. Heat gun or hairdryer.
  5. Adhesive tape.
  6. A clean, dust-free workspace.

Procedure:

  1. Prepare your workspace:
    Ensure you’re working in a clean and well-lit area to prevent dust and debris from getting inside the watch during the repair.
  2. Power off the watch:
    Turn off your Samsung Galaxy Watch6 Classic and ensure it’s disconnected from any charging source.
  3. Heat the watch:
    Use a heat gun or hairdryer to gently heat the edges of the watch. This will soften the adhesive that holds the glass in place. Be careful not to overheat it or damage other components.
  4. Remove the back cover:
    Using a case opening tool or a plastic opening tool, carefully pry off the back cover of the watch. Be gentle and work your way around the edges to avoid damaging the watch’s casing.
  5. Disconnect the battery:
    Once you have access to the watch’s internals, carefully disconnect the battery to ensure there’s no power running through the device.
  6. Remove the old glass:
    Use the opening tool to gently lift and remove the old glass. Take your time and be patient, as this can be a delicate process.
  7. Clean the watch:
    Carefully clean any adhesive residue from the watch’s frame to prepare it for the new glass.
  8. Apply adhesive tape:
    Apply adhesive tape to the edges of the watch’s frame where the new glass will go. Make sure it’s positioned correctly and evenly.
  9. Attach the new glass:
    Carefully place the new glass onto the watch’s frame, ensuring it lines up correctly. Press down gently to secure it in place.
  10. Reconnect the battery:
    Reconnect the battery to the watch.
  11. Reattach the back cover:
    Carefully snap the back cover back into place.
  12. Test the watch:
    Power on the watch and check if the touchscreen and other functions work correctly.
  13. Final check:
    Inspect the watch for any dust or debris between the glass and the screen. If necessary, repeat the process to remove any contaminants.

Please keep in mind that this is a complex repair, and if you’re not comfortable with it, seeking professional assistance is advisable. Additionally, make sure you have the right replacement parts and tools before starting the repair, and be aware of the risks involved.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *